ATS480c79y Power 400kw Current 790A, ATS480 Series Soft Starter

• Application: High-performance Transducer, Three Phase Transducer
• Output Type: Dual
• Principle of Work: Vector Control Transducer
• Switch Mode: High Carrier Frequency PWM Control
• Main Circuit Type: Voltage
• Voltage of Power Supply: High Voltage Variable-Frequency Drive
• Model NO.: ATS480C79Y
• Link of Transformation: AC-DC-AC Variable-Frequency Drive
• Nature of DC Power: Voltage Variable-Frequency Drive
• Function: Simple Type
• Brand: Zicheng
• Transport Package: Freight Forwarder
• HS Code: 8504409990
• Production Capacity: 50000

Product Description

Altivar Soft Starter ATS480 is intended to start and stop asynchronous motors supplied from 208V to 690V. It meets the requirements of the most demanding applications in normal and heavy duty. With an operational rated current of 790A in normal duty, it supplies motor from 220kW to 710kW according to mains voltage. Designed for digitization, connected, optimized to meet cybersecurity standard, it simplifies project execution and maximizes the availability of applications. Its torque control (TCS) masters acceleration and deceleration. It efficiently stops high inertia application thanks to the dynamic braking and DC injection. It could be connected in-line or inside the delta to reduce its operational current. The embedded test routine simplifies the commissioning inside the delta. Its dimensions are 770mm (width) x 329mm (depth) x 890mm (height) and it weighs 115kg. Altivar Soft Starter ATS480 is designed to address process, infrastructures and industrial machines. It conforms to IEC/EN60947-4-1. It is certified CE, cULus, UKCA, CCC, RCM, EAC, and Marine certified DNV, ABS, BV and CCS. Display terminals, remote mounting kit, communication modules are common with Altivar Drives. Line chokes, DNV kits are common with ATS48. ATS480 is compatible with ATS48, it has same footprint, fixing, torque control algorithm, I/O, menus… The integration of Altivar Soft Starter ATS480 in EcoStruxure drastically simplifies architecture selection, detailed design and execution in automation and electrical systems. It is a Green Premium product designed to take the environmental considerations beyond current directives and regulations, compliant with RoHS and REACH.

 

 

Range of Product	Altivar Soft Starter ATS480
Product or Component Type	Soft starter
Product destination	Asynchronous motors
Product Specific Application	Process and infrastructures
Device short name	ATS480
Phase	3 phase
utilisation category	AC-3A AC-53A
Ue power supply voltage	208...690 V - 15...10 %
power supply frequency	50...60 Hz - 20...20 %
[Ie] rated operational current	Normal duty 790.0 A 104 °F (40 °C))
rated current in heavy duty	660.0 A at 104 °F (40 °C) heavy duty
Torque control	True
IP Degree of Protection	IP00
Motor power kW	220.0 kW 230 V in the motor supply line normal duty 400.0 kW 400 V in the motor supply line normal duty 355.0 kW 400 V in the motor supply line heavy duty 500.0 kW 440 V in the motor supply line normal duty 400.0 kW 440 V in the motor supply line heavy duty 500.0 kW 500 V in the motor supply line normal duty 500.0 kW 525 V in the motor supply line normal duty 710.0 kW 660 V in the motor supply line normal duty 630.0 kW 660 V in the motor supply line heavy duty 710.0 kW 690 V in the motor supply line normal duty 630.0 kW 690 V in the motor supply line heavy duty 355.0 kW 230 V to the motor delta terminals normal duty 315.0 kW 230 V to the motor delta terminals heavy duty 630.0 kW 400 V to the motor delta terminals normal duty 500.0 kW 400 V to the motor delta terminals heavy duty
Maximum Horse Power Rating	250.0 hp 208 V normal duty 200.0 hp 208 V heavy duty 300.0 hp 230 V normal duty 250.0 hp 230 V heavy duty 600.0 hp 460 V normal duty 500.0 hp 460 V heavy duty 800.0 hp 575 V normal duty 600.0 hp 575 V heavy duty
Option card	Communication module Profibus DP V1 Communication module PROFINET Communication module Modbus TCP/EtherNet/IP Communication module CANopen daisy chain Communication module CANopen Sub-D Communication module CANopen open style
Device connection	In the motor supply line To the motor delta terminals
[Us] control circuit voltage	110...250 V AC 50/60 Hz - 15...10 %
Apparent power	0.2 kVA
Integrated motor overload protection	True
motor thermal protection class	Class 10E
Protection type	Phase failure line Integrated thermal protection motor Thermal protection starter Current overload motor Underload motor Excessive starting time, locked rotor motor Motor phase loss motor Line supply phase loss line Line supply phase loss motor Thermal protection motor
current limiting %In (5 x Ie maximum)	150…700 %
[In] Rated current pwr loss specifctn	790.0 A
Power loss static current independent	25.0 W
Power loss per device current dependent	2517.0 W
Standards	IEC 60947-4-2 UL 60947-4-2 IEC 60664-1
[Uc] control circuit voltage	24 V DC
Discrete input number	4
Discrete input type	STOP) logic inputs, 3500 Ohm RUN) logic inputs, 3500 Ohm DI3) programmable as logic input, 3500 Ohm DI4) programmable as logic input, 3500 Ohm
Input compatibility	STOP discrete input level 1 PLC IEC 61131-2 RUN discrete input level 1 PLC IEC 61131-2 DI3 discrete input level 1 PLC IEC 61131-2 DI4 discrete input level 1 PLC IEC 61131-2
Discrete input logic	Programmable digital input < 5 V
Relay output number	3
Relay output type	Relay outputs R1A 1 NO Relay outputs R1B 1 NO Relay outputs RIC NO/NC programmable
Minimum switching current	100 mA 12 V DC relay outputs
Maximum switching current	Relay outputs 2 A 250 V AC Relay outputs 2 A 30 V DC Relay outputs
Discrete output number	2
Discrete output type	DQ1) programmable digital output <= 30 V DQ2) programmable digital output <= 30 V
Output compatibility	Open collector level 1 PLC IEC 65A-68
analogue input number	1
Analogue input type	AI1/PTC PTC/Pt 100 temperature probe PTC2 PTC/Pt 100 temperature probe PTC3 PTC/Pt 100 temperature probe
analogue output number	1
Analogue output type	Current output AQ1 0...20 mA or 0...10 V 500 Ohm
communication port protocol	Modbus serial
Connector Type	1 RJ45
Communication data link	Serial
Physical interface	2-wire RS 485
Transmission Rate	1200...256000 bit/s
Transmission frame	RTU
Data format	8 bits, configurable odd, even or no parity
Type of polarization	No impedance Modbus serial
Number of addresses	0…227 Modbus serial
Method of access	Slave Modbus serial
Function Available	External bypass control Pre-heating Smoke extraction Multi-motor cascade Second motor set User management Ports and services hardening Security event logging Cybersecure firmware update Single direction
Display screen available	True
Operating position	Vertical +/- 10 degree
Height	35.04 in (890.0 mm)
Width	30.31 in (770.0 mm)
Depth	12.95 in (329.0 mm)
Net Weight	253.53 lb(US) (115.0 kg)
Environment
Electromagnetic compatibility	Conducted and radiated emissions level A IEC 60947-4-2 Conducted and radiated emissions with bypass level B IEC 60947-4-2 Damped oscillating waves level 3 IEC 61000-4-12 Electrostatic discharge level 3 IEC 61000-4-11 Immunity to electrical transients level 4 IEC 61000-4-4 Immunity to radiated radio-electrical interference level 3 IEC 61000-4-3 Voltage/current impulse level 3 IEC 61000-4-5
Pollution degree	Level 3
[Uimp] rated impulse withstand voltage	6 kV
[Ui] Rated Insulation Voltage	690 V
Environmental class (during operation)	Class 3C3 according to IEC 60721-3-3 Class 3S2 according to IEC 60721-3-3
Relative humidity	0…95 % without condensation or dripping water IEC 60068-2-3
Ambient air temperature for operation	104…140 °F (40…60 °C) with current derating of 2 % per °C) 5…104 °F (-15…40 °C) without derating)
Ambient Air Temperature for Storage	-13…158 °F (-25…70 °C)
Operating altitude	<= 3280.84 ft (1000 m) without derating > 3280.84...13123.36 ft (> 1000...4000 m) with current derating 1 % per 100 m
Maximum deflection under vibratory load (during operation)	1.5 mm at 2...13 Hz
Maximum deflection under vibratory load (during storage)	1.75 mm at 2...9 Hz
Maximum deflection under vibratory load (during transport)	1.75 mm at 2...9 Hz
Maximum acceleration under vibrational stress (during operation)	10 m/s² at 13...200 Hz
Maximum acceleration under vibratory load (during storage)	15 m/s² at 200...500 Hz 10 m/s² at 9...200 Hz
Maximum acceleration under vibratory load (during transport)	15 m/s² at 200...500 Hz 10 m/s² at 9...200 Hz
Maximum acceleration under shock impact (during operation)	150 m/s² at 11 ms
Maximum acceleration under shock load (during storage)	100 m/s² at 11 ms
Maximum acceleration under shock load (during transport)	100 m/s² at 11 ms

 

Product Certifications	CE cULus CCC UKCA RCM EAC DNV ABS BV CCS

Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	23.23 in (59.0 cm)
Package 1 Width	37.40 in (95.0 cm)
Package 1 Length	40.55 in (103.0 cm)
Package 1 Weight	297.62 lb(US) (135.0 kg)

Main products: frequency converters, controllers, drives, switches, redundant systems, power modules, system software, industrial Ethernet, central processing units, low-voltage, logic control modules

Introduction: Shanghai Zicheng Electrical Technology Co., Ltd. was established on November 26, 2021, with its registered address at Room 3009, Zone T, Building 1, No. 3560 Waiqingsong Road, Baihe Town, Qingpu District, Shanghai. The legal representative is Luo Fangzhen. The business scope includes general projects: technical services, technical development, technical consulting, technical exchange, technology transfer, and technology promotion; Home appliance installation services; Installation services for ordinary mechanical equipment; Sales of electrical equipment; Sales of mechanical equipment; Sales of CNC machine tools; Sales of electronic specialized equipment; Wholesale of hardware products; Operation of wires and cables; Retail of hardware products; Wholesale of electronic components; Retail of electronic components; Sales of instruments and meters; Sales of electronic products; Sales of communication equipment; Repair of communication equipment; Integration of intelligent control systems; Technology import and export; Import and export of goods. (Except for projects that require approval according to law, business activities can be carried out independently based on the business license in accordance with the law) Licensed project: construction engineering construction.

 

After Sales Service

 

The delivery date starts with a one-year warranty, and human factors are no longer covered by the warranty.